|
After working perfect for several months my IC1 stopped working from distance some time ago, I could reach it locally but not through domoport. I found out that the default gateway was reseted to 0.0.0.0 and also the serial no seems to have changed !!!. I wait from answer from Merten but maybe it will be quicker here? |
|
With this you will need help from Merten. I have the same experience and it was related to an older firmware. Before you can upgrade the firmware you need help from Merten to set the right serial number. This can be made via internet if you allow access from nonlocal IP´s (your other related question). If you replace the dots with stars in the netmask you will allow direct access without domoport. (255.255.255.0 -> 255*255*255*0) You need to know your public IP to get in contact with the device. To see your IP you can go to whatsmyIP.org Now i don´t need domoport except as maybe a DNS-service. I will try with dyndns.org for some weeks and see if it works, Thank´s
(Mar 08 '10 at 19:14)
Magnus Ryd
|
